Simplicity S20 PET HEPA Media and Secondary Filter Set (SF20PET)
The SF20 PET HEPA Media and Secondary Filter Set, comes with the 3 filters needed for your Simplicity S20 PET, bagless upright. We recommend replacing these filters yearly. These filters are NOT washable. These filters are to be replaced every 6-12 months. This will depend upon the amount of use. If you vacuum more than a couple times a week, change every 6 months.
Genuine Simplicity Filter Set: SF20PET
When to Change Your Filters:
If someone in your household suffers from Allergies or Asthma, or you vacuum multiple times a week: we recommend that you change your filters every 6 months. If you use your vacuum once a week, we recommend you change your filters regularly.
Always be mindful of your filters. You should not let your filters get black, as this will stress your motor. A good rule of thumb, is to set a reminder in your phone or calendar, to check your filters every 6 months.
Replacing the HEPA Media Filter:
1. Unplug the vacuum cleaner
2. To access the filter, remove the filter assembly by removing the dust container lid. Turn the lid counter-clockwise until it clicks.
3. Lift out the filter assembly and disassemble. Discard this filter. DO NOT WASH AND REUSE FILTER.
4. Replace the filter with new filter, reassemble the filter assembly and replace the dust container into the vacuum.
Replacing the Secondary Filters:
The secondary filters are located underneath the dust container
1. Unplug the vacuum cleaner
2. Remove the dust container
3. Remove the secondary filters cover by turning the lid counter-clockwise until it clicks.
4. Lift out the secondary filter and discard. DO NOT WASH AND REUSE FILTER
5. Replace the secondary filter and filter cover and put the dust container back into the vacuum.
PLEASE NOTE: FILTERS CANNOT BE WASHED AND REUSED.
Staff Top Picks
