Andis 2-Speed Pet Nail Grinder
The Andis 2-Speed Pet Nail Grinder is lightweight, easy to use, and safely trims nails of any cat or dog breed. The head of the nail grinder rotates to gently file pet’s ragged and sharp nails, leaving them smooth and round! Your pet will be healthier and there is less risk of scratched furniture and floors with trimmed nails.
Choose from the bigger or smaller sanding attachments as well as 7,000 / 12,000 RPM speeds to give your pet the best nail grinding experience. The comfortable design and easy grip with the silicone sleeve make the nail trimming experience just as stress free for you as it is for your pet.
Please continue reading below for helpful tips on how to get your pet used to a nail grinder.
Overview
Directions:
Before clipping, make sure your pet is properly bathed, dried, and thoroughly combed or brushed. This will ensure the clipper glides smoothly through your pet's coat for optimal results. Clipping an unclean pet is not only more difficult and time consuming, but it will also dull your blades.
Caution:
Be sure your pet is healthy enough to be groomed. When using an electrical appliance, basic precautions should always be followed.
How to get your pet used to nail handling:
First, show them the nail grinder and let them sniff it while it is turned off. Then, turn it on so they can get used to the sound it makes. Have them sit while the tool is running in your hand. Give them positive reinforcement. Once they are used to the tool, try touching it to their nails. If they are not ready, you may need to repeat the above steps a few times.
Specifications
Speeds: 7000 RPM /12000 RPM
Weight: 0.4 lbs
Length: 8.25 inches
Width: 2.5 inches
Height: 10.75 inches
What’s in the Box
- 2-Speed Nail Grinder 65880
- Soft Grip Silicone Sleeve
- Soft Case
- Finishing Stone
FAQ
Does this tool have a guard, so I know I won’t be grinding down too far?
- This grinder does not have a guard.
How do you put the sander on?
- To insert a new sanding drum, insert the sanding drum into the collet. Depress collet release button while turning collet nut clockwise until it locks into place. Using the wrench provided, turn collet nut clockwise until sanding drum is tight. We suggest reading through the Owner’s Manual for a complete list of instructions.
Warranty
- 90-Day Limited Warranty
Staff Top Picks
